YOUR SHOPPING BASKET

Item:

0

NET:

£0.00

Showroom
Directorder

Item No.

Qty

STAINLESS STEEL

Selecting the right material is decisive for the success of your project. Here you will find a brief overview of the materials available from MEVACO so that you know what lies behind the designations. Please don't hesitate to get in contact if you can not find your desired material.
edelstahl 1 X5CrNi18-10 (1.4301 IIIC)
Rolled blank
The material is ID hot rolled from a thickness of 3.0 mm.

Grain 240 polished on one side, PVC coated on one side

Grain 240 polished on both sides, PVC coated on both sides


The indentation that arises due to perforation is also pre-polished in the case of pre-polished material. Visual effect: the perforation appears oval in the polished direction.


There are two versions in the case of our perforated sheets, which are polished on both sides.
  • Rear side is polished afterwards (after perforation), front side can, where required, be polished again.
  • Material pre-polished on both sides, rear side with transparent PVC coating.

X2CrNiMo17-12-2 2B (AISI 316 L)
X6CrNiMoTi17-12-2 2B (AISI 316 L)
X6CrNiTi18-10 2B (AISI 316 L)

The following products are available in this material:

  • Expanded metals
  • Perforated sheets
  • Crimped mesh
  • Welded mesh